The Universal Ventilation System. Tested up to 110mph wind driven rain with NO measurable leakage. ​Uni-Vent II will conform to virtually any roof panel configuration. It compresses and fills every void between your ridge cap and the roof panel. Factory applied glue strips allow the installer to roll out Uni-Vent II and apply it to the roof panel, even in windy conditions. Then, any standard ridge cap can finish off the installation.

• Material is 2" wide with standard thickness of 1"
• Stock one product to match any roof panel configuration
• Use any manufacturers ridge cap
• Use on any roof pitch from 2/12 to 20/12
• Thicker product available for R-Panel and other higher rib configurations
• Applied to ridge with a dual strip 1/4" from edge of where Ridge Cap will be installed; Ridge Cap applied overtop
• Pure Polyurethane Foam
• Vinyl Coating
• UV Stabilized/Fire Retardant 
• Continuous Double Glue Strip

Dimensions: 1" x 2" x 50'

(50'/ROLL - 2 ROLLS/CTN)